SOLVENTS "Fast drying"

 
 FISOLVE 102 - 3430
A FAST DRYING SYNTHETIC, RESIDUE FREE, SOLVENT - Cleans oil, grease, gummy deposits, dust and dirt oil, tar, grime, crayon, shoe polish, lipstick, fresh paint, carbon paper. This highly effective solvent may be used to clean and degrease precision components, electric motors, automatic pinsetters printed circuits, sewing machines, textile industry equipment, printing presses, rollers, blankets, offset type, watches, clocks, mechanical equipment, typewriters, and other office machines. It is water soluble, but without surfactant and is residue free. Excellent as label remover. Also it acts as MOTOR STARTING FUID. - for starting trucks, cars, aircraft, snow blowers, construction equipment and other gasoline or diesel engines. Helps save batteries and ignition systems. This special formula works without chlorinated solvents and is not classified for health hazards. Flash point : < 0°c
 FISOLVE 132 - 4628
This fast acting solvent based product performs many functions in a single formula. It removes paint, gaskets, decals, sealers, finishes, even varnish and adhesive quickly and completely. It may be used on wood, concrete, and metal surfaces. The highly concentrated formula works well on metal but will even perform on wood without raising the grain. Excellent for use in paint and body shops, craft and hobby stores, even marine and aircraft maintenance.
APPLICATIONS: Motors, chains and chain drives, clutches, relays. Portable tools, cables, gears, locks, radar equipment, fuse holders, gauges, elevators, lift trucks, hoists, gold and silver contacts, air tools, brakes, blowers, fans, mechanical equipment, wire rope, welds, printing presses, air conditioners, pumps, pulleys, rollers. Flash point : non-flammable. Not safe on plastics and paints.
 FISOLVE 133 - 3461
SAFETY SOLVENT - This special formulation is non-flammable and non-conductive. It rapidly removes dirt, grease, oil and grime from both metallic and non-metallic surfaces. Cleaning is quick and simple without the danger of injury to working parts. Leaves no residue. This solvent is ideally suited for use on electric motors, ignition systems, typewriters, generators, power tools, etc. It is dielectric (non-conducting to 29,000 Volts) and will not short motors, generators or other electrical equipment. Simply spray on fisolve 133, let it penetrate the grease, dirt and grime, and spray with compressed air and oil. Safe to use on numerous plastics and varnishes but will soften polystyrenes and polycarbonates, , and other sensitives surfaces. Always test on small area prior to use.
 FISOLV' freins - 3519
BRAKE & PARTS CLEANER - This solvent is used to remove brake fluid, grease, oil and other contaminants from brake linings and drums. It can be used safely on disc pads, drums, cylinders and springs. This product is a high pressure spray that blasts away dirt, grease, oil and dangerous deposits that cause excessive wear to brake mechanisms. Dries fast-non-corrosive to metal. Excellent all around metal parts cleaner. Flash point : < 0°c
 FISOLVE IP - 3450
ELECTRIC CLEANER - Pressurized electrical contact cleaner. High-purity solvent instantly and safely cleans, degreases, flushes out and carries off soils, films and other contaminants from electronic equipment, components and precision-engineered parts. The low-surface-tension material penetrates micro-openings so components can be cleaned in place, assuring original electronic values. Will not harm rubber, plastics, insulation, paint or cause corrosion to metals. Used for critical cleaning of computers, printed circuits, precision gauges and instruments, motors, switches, relays, potentiometers, hearing aids, tv tuners, office machines, coin chutes, bearings, vacuum tube parts, hermetic motors, micromodules and more. It is water soluble, but without surfactant and is residue free. Flash point : 10°C
 FICARBU'NET - 7046
CHOKE & CARBURETOR CLEANER - This combination of very strong solvents is formulated to remove dirt, gum and varnish deposits that tend to build up on the moving and sealing surfaces of engine carburetors, heat valves and automatic chokes. Periodic use on cars, trucks, airplanes, boats, lawnmowers, etc., will keep them clean, fuel efficient and trouble free. It can even be used on running engines. This product is formulated for high performance without chlorinated solvents. Removes varnish and gum, eliminates stalling and rough Idling. Contains no lead, phosphorous, silicone or alcohol, will not harm oxygen sensors, catalytic converters or fuel injection systems. Flash point :
 FISOLVE 109 - 4740
GENERAL PURPOSE SAFE SOLVENT - Can be used on all surfaces such as paint, plastic, rubber, metal, etc... . Flash point : < 0°C
Products Flash point Power
(petroleum =1)
Drying time
(ether = 1)
  FISOLVE 102 - 3430  < 0 °c 5 1.2
  FISOLVE 132 - 4628  Non flammable 5 1.8
  FISOLVE 133 - 3461  Non flammable 3.4 6.5
  FISOLV' freins - 3519  < 0 °c Not available 2.1
  FISOLVE IP - 3450  10 °c Not available 2.1
  FICARBU'NET - 7046 < 0°c > 3.5 NA
  FISOLVE 109 - 4740  < 0 °c 1.14 1.6
     

HOME :     {home.gif}       INDEX :    {index.gif}