Aerosol protective coatings

  - Plastic films
 FITEK PF - 3109
STRIPPABLE PROTECTIVE COATING - • Vinyl lacquer coating - • For use on non-porous surfaces, such as unpainted metal, glass or baked enamel, aluminum, woodwork surfaces. • Multiple thin coats insure good strippable properties. • Protects against rust, corrosion, salt, moisture, portland cement, abrasion, mars, nicks and scratches during shipment and storage. • Protects during stamping, reaming, assembling operations. • No solvents are required for removal because FITEK PF "peels as banana skin" from sprayed area, leaving a clean surface. • May be harmful to certain plastics. Test on small area prior to use. Color : Colorless, ( blue, red on request)
APPLICATIONS: Precision tools, dies, instruments, castings, highly polished surfaces (mirrors, lenses, stainless steel, chrome, anodized aluminum).
  FITEK VAC 1 - 3154
CLEAR ACRYLIC INSULATED VARNISH - Quick drying -• Outstanding adhesion to metal and insulation components. - Protects against moisture and corrosion - Forms a protective barrier that seals against dirt and grime - Air dries to hard glossy, flexible, providing excellent strength. - Highly effective in resisting oil, acid, moisture, heat, alkalis and chemicals. - Excellent insulator - Use for heavy duty applications, electrical windings, surface exposed to extreme corrosion conditions, battery terminals, printed circuit, chromes, copper, etc...  Color : colorless
APPLICATIONS: Recommended as a coating for end windings of motors, field coils, exposed metal parts, bus bars, collector rings, phenolic and porcelain molded parts. Commutator ends, armatures, transformers, switchboard parts. Sealing electrical and electronic components, new or old stator windings, end shields.
  - waxes & oils
  FITEK SL - 3024
A LIQUID MATERIAL FOR QUICKLY REMOVING WATER FROM THE SURFACE OF METALS - Penetrant Lubricant, Demoisturant, Rust Preventative - ultra-thin film out performs many single purpose products. - Does not contain silicone. -
- PENETRATES : It's affinity for metals penetrates microscopic openings, and irregularities of surface even the tiny pores of metal grain.
- DEMOISTURIZES : lt's low surface tension allows it to force its way under water and to displace it on metal surfaces... providing a protective barrier between moisture and the metal surface. -
- LUBRICATES : with a unique blend of lubricating ingredients, thus eliminating the need for silicones or old fashioned oils which leave a sticky or gummy residue.
- INHIBITS CORROSION : by depositing a long lasting, rust preventative film which displaces and repels water. A thin molecular film is formed which seals out both water and oxygen. This film is remarkably durable and actually expands and contracts with the metal.
FITEK SL keeps motors and other electrical equipment in good operating condition, even in areas of extreme moisture and salt atmosphere. Prevents electrical failure caused by moisture, without affecting electrical characteristics. FITEK SL can restore submerged or moisture saturated equipment. When used as preventative maintenance, FITEK SL will prevent rust and corrosion of expensive machinery. FITEK SL is a water displacing liquid which is used after final rinsing to quickly dry metal parts. It may be used to dry parts after plating, pickling, cleaning, phosphating, or other metal finishing operations. FITEK SL will completely displace water from the surface of the parts including crevices and it will prevent tarnishing and staining. Color : colorless
A revolutionary new product :
*Displaces Water *Lubricates *Cleans *Prevents Corrosion *Penetrates *Long Lasting
APPLICATIONS: Electrical connectors, relays, circuit breakers, controls, communication assemblies, bus bars, guide rails, generators, instruments, tooling, hand tools, motors, oscillators, ignitions, transformers, transmitters, gears, machine tools, weapons, sporting goods, many automotive applications, production equipment of all kinds, mold saver, locks, hinges, threads, marine engines, submerged electrical receptacles, inprocess parts, sub-assemblies. FITEK SL is a water displacing liquid which is used after final rinsing to quickly dry metal parts. It may be used to dry parts after plating, pickling, cleaning, phosphating, or other metal finishing operations. FITEK SL will completely displace water from the surface of the parts including crevices and it will prevent tarnishing and staining.
  FITEK SD - 3107
RUST PREVENTATIVE WAX - An easy to use waxy-type rust preventative compound designed for sheltered in-storage use. FITEK SD coats the part thoroughly, and dries to an almost wax-like film, which is easily removed later by one solvent cleaners. For the rust protection of metal parts in process, to prevent the corrosion of Auto-body, molds, dies, gears, hand tools, hardware, nuts, bolts, and other parts in storage. Color : colorless
  FITEK SFP - 3103
A rustproofing oil for protecting steel parts against corrosion under severe storage or operating conditions.
   FITEK SCL - 3013
A temporary protective coating. Resists rust corrosion. - Gives dry hard no sticky or waxy film. Medium thickness - Resists to handling - Very high corrosion - Removed by solvents.

HOME :     {home.gif}       INDEX :    {index.gif}